SHOWTEC Zipp LED DMX Guía de usuario

Pulsator LED DMX ORDERCODE 43074

8 Installation Remove all packing materials from the Pulsator LED. Check that all foam and plastic padding is removed. Connect all cables. Do not su

9 One Pulsator LED (Sound-control) 1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation. Plug

10 Multiple Pulsator LEDs (DMX Control) 1. Fasten the effect light onto firm trussing Leave at least 1 meter on all sides for air circulation. 2. Alw

11 Dipswitch setting for DMX Mode DMX products must have their own "address" to receive DMX signals. Addresses on the controller are set b

12

13 Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized show

14 DMX Channels Channel 1 – Colors 0-19 Blackout 20-39 Red 40-59 Green 60-79 Blue 80-99 Green+Blue 100-119 Red+Blue 120-139 Red+Green 140-159 Red+G

15 Maintenance The operator has to make sure that safety-relating and machine-technical installations are to be inspected by an expert after every ye

16 Problem Probable cause(s) Remedy One or more fixtures are completely dead. No power to the fixture · C

17 Product Specification Model: Showtec Pulsator LED Voltage: 240V-50Hz (CE) Power Consumption: 30W Lamp: 9W RGB LED Fuse: 2A / 250V Weight: 2,32 kg

Congratulations! You have bought a great, innovative product from Showtec. The Showtec Pulsator LED brings excitement to any venue. Whether you want s

1 2 2 4 4 5 5 6 6 7 8 8 8 8 8 9 9 10 11 12 13 13 14 15 15 15 15 15 17 Showtec Showtec Pulsator LED™ Product Guide Warning...

2 WARNING Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all

3 IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized mod

4 OPERATING DETERMINATIONS • This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will

5 Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly

6 Description of the device Features The Showtec Pulsator LED is a LED centerpiece with high output and great effects. • Small compact LED scanner

7 Backside 3 4 5 6 7 8 9